{"title":"DisplayESP32","description":"\u003cp\u003eDisplay integrated with ESP32\u003c\/p\u003e","products":[{"product_id":"esp32-3-5inch-rounded-corner-touch-lcd-development-board-320-480-onboard-audio-codec-chip-built-in-microphone-and-speaker-supports-wi-fi-and-ble-esp32-wroom-32-esp32-2432s","title":"ESP32 3.5inch Rounded Corner Touch LCD Development Board, 320 × 480, Onboard Audio Codec Chip, Built-in Microphone And Speaker, Supports Wi-Fi And BLE, ESP32-WROOM-32, ESP32-2432s","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThis product is a high-performance, highly integrated microcontroller development board designed by Waveshare. It is equipped with a 3.5inch capacitive high-definition IPS screen, a highly integrated power management chip, RTC, low-power audio codec chip and other peripherals, which are convenient for development and embedding into the product. No assembly or wiring is required, so it's easy to play with Xiaozhi AI.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli class=\"\"\u003ePowered by the ESP32-D0WDR2-V3 high-performance Xtensa 32-bit LX6 dual-core processor, with a main frequency of up to 240 MHz\u003c\/li\u003e\n\u003cli class=\"\"\u003eSupports 2.4 GHz Wi-Fi (802.11 b\/g\/n) with speeds up to 150 Mbps\u003c\/li\u003e\n\u003cli class=\"\"\u003eBluetooth v4.2 full standard, including Classic Bluetooth (BR\/EDR) and Bluetooth Low Energy (Bluetooth LE)\u003c\/li\u003e\n\u003cli class=\"\"\u003eBuilt-in 520 KB SRAM and 448 KB ROM, with stacked 2 MB PSRAM and external 16 MB Flash\u003c\/li\u003e\n\u003cli class=\"\"\u003eFeatures a Type-C interface, enhancing user convenience and device compatibility\u003c\/li\u003e\n\u003cli class=\"\"\u003eBuilt-in 3.5inch capacitive touch high-definition IPS display with a resolution of 320×480, 262K colors for clear color pictures\u003c\/li\u003e\n\u003cli class=\"\"\u003eEmbedded with ST7796 driver chip and FT6336 capacitive touch chip, communicating through SPI and I2C interfaces respectively, minimizes required IO pins\u003c\/li\u003e\n\u003cli class=\"\"\u003eOnboard PCF85063 RTC chip; when a battery is connected, it keeps time even when powered off\u003c\/li\u003e\n\u003cli class=\"\"\u003eOnboard PWR and BOOT side buttons, configurable for custom function development\u003c\/li\u003e\n\u003cli class=\"\"\u003eOnboard 3.7V MX1.25 lithium battery charge\/discharge interface\u003c\/li\u003e\n\u003cli class=\"\"\u003eI2C, UART, and multiple GPIOs are broken out for external device connection and debugging, allowing flexible peripheral configuration\u003c\/li\u003e\n\u003cli class=\"\"\u003eOnboard TF card slot, providing expanded storage, fast data transfer, and flexibility, suitable for data logging and media playback, simplifying circuit design\u003c\/li\u003e\n\u003cli class=\"\"\u003eUsing AXP2101 offers benefits such as efficient power management, support for multiple output voltages, charging and battery management functions, and optimization of battery life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOnboard Resource\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54001-content2.webp?v=1790413285\" alt=\"\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eESP32-D0WDR2-V3 (back side)\u003c\/strong\u003e Wi-Fi and Bluetooth SoC, 240 MHz clock, 2MB PSRAM\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003e16MB NOR Flash (back side)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eIPEX1 connector\u003c\/strong\u003e Switching to use the external antenna via resoldering an onboard resistor\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003eOnboard antenna\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003eTF card slot\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003eMX1.25 speaker header\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003eBOOT button\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003eRESET button\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003ePWR Button\u003c\/strong\u003e Default long press for 6s to power off, short press to power on\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eAXP2101\u003c\/strong\u003e Highly integrated power management chip\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003eCharging indicator\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003ePower indicator\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003eType-C port\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003eMicrophone\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003ePCF85063\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003eRTC clock chip\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eES8311\u003c\/strong\u003e Low-power audio codec chip\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003e2.54mm pitch GPIO header\u003c\/strong\u003e Brings out available IO function pins for easy expansion\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eMX1.25 lithium battery header\u003c\/strong\u003e MX1.25 2PIN connector for connecting a 3.7V lithium battery, supports charging and discharging\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eRelated Documents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.waveshare.com\/ESP32-Touch-LCD-3.5\" target=\"_blank\" rel=\"noopener\"\u003eWiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveShare","offers":[{"title":"Default Title","offer_id":50531597418573,"sku":"E54001-001","price":49.79,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54001-win1.jpg?v=1790413359"},{"product_id":"esp32-s3-dualeye-touch-lcd-1-28","title":"ESP32-S3-DualEye-Touch-LCD-1.28","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eESP32-S3-DualEye-Touch-LCD-1.28 is a microcontroller development board that supports 2.4GHz Wi-Fi and BT BLE 5. It integrates large capacity Flash and PSRAM, featuring two 1.28inch LCD on board, capable of smoothly running GUI interface programs such as LVGL. Combined with various peripheral interfaces, it is suitable for the quick development of the HMI and other ESP32-S3 applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli class=\"\"\u003ePowered by the ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, with a main frequency of up to 240 MHz\u003c\/li\u003e\n\u003cli class=\"\"\u003eSupports 2.4 GHz Wi-Fi (802.11 b\/g\/n) and Bluetooth 5 (LE) with an onboard antenna\u003c\/li\u003e\n\u003cli class=\"\"\u003eBuilt-in 512 KB SRAM and 384 KB ROM, with 8 MB PSRAM stacked and onboard 16 MB Flash (supports connecting external expansion devices)\u003c\/li\u003e\n\u003cli class=\"\"\u003eType-C interface for improved user convenience and device compatibility\u003c\/li\u003e\n\u003cli class=\"\"\u003eOnboard two 1.28inch LCD screens, resolution 240 × 240, 65K colors\u003c\/li\u003e\n\u003cli class=\"\"\u003eSupports I2C touch control with interrupt\u003c\/li\u003e\n\u003cli class=\"\"\u003eExposes UART, I2C, and some I\/O interfaces\u003c\/li\u003e\n\u003cli class=\"\"\u003eOnboard 3.7V MX1.25 lithium battery charge\/discharge interface\u003c\/li\u003e\n\u003cli class=\"\"\u003eOnboard TF card slot for expanded storage and fast data transfer, offering flexibility for data logging and media playback, simplifying circuit design\u003c\/li\u003e\n\u003cli class=\"\"\u003eSupports precise control of flexible clock and multiple power modes for low-power applications across various scenarios\u003c\/li\u003e\n\u003cli class=\"\"\u003eMultiple GPIOs brought out, can be mapped to various function interfaces for customized development\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOnboard Resources\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54002-content1.webp?v=1790414254\" alt=\"\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eESP32-S3R8\u003c\/strong\u003e Dual-core processor, operating frequency up to 240MHz\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003e16MB Flash\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003eBattery charging management chip\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003ePower amplifier chip\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eES8311\u003c\/strong\u003e Low-power audio codec chip\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003eES7210\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003eMicrophone\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eMP1605GTF-Z\u003c\/strong\u003e Power module, supporting up to 3.3V 2A output\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003eOnboard ceramic antenna\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eIPEX1 connector\u003c\/strong\u003e Switching to use the external antenna via resoldering an onboard resistor\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003eBOOT button\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eGPIO1 function modification resistor\u003c\/strong\u003e Default soldered near the crystal, GPIO1 is used for battery voltage measurement. If changed to the position away from the crystal, the signal is routed to the FPC cable, allowing software modification for triple-screen display\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eBattery header\u003c\/strong\u003e MX1.25 2PIN connector for 3.7V lithium battery, supports charging and discharging\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eCharging indicator\u003c\/strong\u003e When a system battery is connected, it stays on while charging and turns off when fully charged (status indeterminate when no system battery is connected)\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003eSpeaker header\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eLCD1-Board SH1.0 14PIN header\u003c\/strong\u003e For programming and log printing\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003e18PIN FPC connector\u003c\/strong\u003e While the main board is powered on, adjust the resistor value at position R12 and modify the display configuration parameters in the software to achieve triple-screen display. If the board is broken off, the FPC cable can connect both screens to work properly (note: the RESET button is not available when the board is broken off and connected via FPC cable)\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003e18PIN FPC header\u003c\/strong\u003e For connecting the main controller\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eTF card communication mode selection\u003c\/strong\u003e When the board is broken off, the side controlling the TF card can be switched to SPI mode, allowing one SPI to control both the TF card and the screen simultaneously\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eTF card slot\u003c\/strong\u003e Allows connection of high-capacity TF cards\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003eRESET button\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eLCD2-Board SH1.0 14PIN cable header\u003c\/strong\u003e When the board is broken off, configure the resistor at position R19 for SPI mode, then the 14PIN FPC can be used to control both the TF card and the screen via one SPI bus\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003eType-C port\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eRelated Document\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.waveshare.com\/ESP32-S3-DualEye-Touch-LCD-1.28\" target=\"_blank\" rel=\"noopener\"\u003eWiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveShare","offers":[{"title":"Default Title","offer_id":50531623370829,"sku":"E54002-001","price":56.17,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54002-win1.jpg?v=1790414338"},{"product_id":"esp32-s3-photopainter-7-3inch-e6-full-color-e-paper-display-with-solid-wood-photo-frame-ultra-long-standby-800-480-resolution","title":"ESP32-S3-PhotoPainter 7.3inch E6 Full Color E-paper Display With Solid Wood Photo Frame, Ultra-long Standby, 800 × 480 Resolution","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eESP32-S3-PhotoPainter\u003c\/strong\u003e\u003cspan\u003e is an e-Paper AIoT photo frame, equipped with ESP32-S3 microcontroller with Wi-Fi and BLE communication support. Onboard 7.3inch e-paper display, features ultra-low power consumption, suitable for portable devices and long-battery-life scenarios. Integrated with an RTC chip, SHTC3 temperature and humidity sensor, TF card slot, low-power audio codec chip circuit, and Lithium battery recharge management circuit.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdopts high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency\u003c\/li\u003e\n\u003cli\u003eSupports 2.4GHz Wi-Fi and Bluetooth 5 (LE), with onboard antenna\u003c\/li\u003e\n\u003cli\u003eBuilt-in 512KB SRAM, 384KB ROM, with integrated 16MB Flash and 8MB PSRAM\u003c\/li\u003e\n\u003cli\u003eOnboard audio encoder and decoder chips, supports voice capture and playback, enabling AI speech interaction applications\u003c\/li\u003e\n\u003cli\u003eAdopts E Ink Spectra 6 (E6) technology, features high contrast and high color saturation\u003c\/li\u003e\n\u003cli\u003eSupports six primary colors and employs Dithering technology to create vivid and saturated full color images\u003c\/li\u003e\n\u003cli\u003eUltra-low power consumption, basically power is only required for refreshing\u003c\/li\u003e\n\u003cli\u003eLarge capacity Lithium battery (optional), onboard power saving circuit, enabling thousands of refreshes on a single charge (without external speaker or other high-power peripherals)\u003c\/li\u003e\n\u003cli\u003eOnboard PCF85063 RTC chip and SHTC3 temperature \u0026amp; humidity sensor for accurate RTC management and environmental monitoring\u003c\/li\u003e\n\u003cli\u003eSimple solid wood photo frame, elegant and beautiful\u003c\/li\u003e\n\u003cli\u003eRotatable stand and hook hanger on the back, not limited to usage scenarios\u003c\/li\u003e\n\u003cli\u003eOpen source code, more freedom to customize functions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOnboard Resource\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54003-content1.jpg?v=1790414821\" alt=\"\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-S3-WROOM-1-N16R8\u003c\/strong\u003e\u003cbr\u003eWi-Fi and Bluetooth SoC, 240MHz operating frequency, with integrated 16MB Flash and 8MB PSRAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSHTC3 temperature and humidity sensor\u003c\/strong\u003e\u003cbr\u003eprovides ambient temperature and humidity measurements, enabling environmental monitoring function\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eES7210 ADC audio decoder chip\u003c\/strong\u003e\u003cbr\u003ehigh-performance and low-power consumption audio ADC, supports multiple-channel microphone inputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eES8311 DAC audio encoder chip\u003c\/strong\u003e\u003cbr\u003ehigh-performance and low-power consumption audio DAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTG28\u003c\/strong\u003e\u003cbr\u003ehighly integrated power management chip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTF card slot\u003c\/strong\u003e\u003cbr\u003esupports FAT32-formatted TF card for data expansion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMX1.25 2PIN speaker header\u003c\/strong\u003e\u003cbr\u003eaudio output signal, for connecting external speaker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMX1.25 2PIN Lithium battery header\u003c\/strong\u003e\u003cbr\u003efor connecting Lithium battery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMX1.25 2PIN RTC backup battery header\u003c\/strong\u003e\u003cbr\u003esupports rechargeable \u003ca href=\"https:\/\/www.waveshare.com\/rtc-battery.htm\" target=\"_blank\"\u003eRTC\u003c\/a\u003e batteries only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKEY button\u003c\/strong\u003e\u003cbr\u003efor custom function\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBOOT button\u003c\/strong\u003e\u003cbr\u003epress it when powering on to enter download mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePWR power button\u003c\/strong\u003e\u003cbr\u003efor system power supply ON\/OFF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCF85063\u003c\/strong\u003e\u003cbr\u003eRTC chip, for time keeping function\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual-microphone array design\u003c\/strong\u003e\u003cbr\u003edual microphone array, supporting richer voice interaction functions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType-C port\u003c\/strong\u003e\u003cbr\u003efor program burning and log printing\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eRelated Documents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/files.waveshare.com\/wiki\/ESP32-S3-PhotoPainter\/ESP32-S3-PhotoPainter-Schematic.pdf\" target=\"_blank\"\u003eESP32-S3-PhotoPainter Schematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/files.waveshare.com\/wiki\/7.3inch-e-Paper-HAT-(E)\/7.3inch-e-Paper-(E)-user-manual.pdf\" target=\"_blank\"\u003eDisplay datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/files.waveshare.com\/wiki\/common\/Esp32-s3_datasheet_en.pdf\" target=\"_blank\"\u003eESP32-S3 Series Datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/files.waveshare.com\/wiki\/common\/Esp32-s3_technical_reference_manual_en.pdf\" target=\"_blank\"\u003eESP32-S3 Technical Reference Manual\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/files.waveshare.com\/wiki\/common\/Pcf85063atl1118-NdPQpTGE-loeW7GbZ7.pdf\" target=\"_blank\"\u003ePCF85063 Datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/files.waveshare.com\/wiki\/common\/ES8311.DS.pdf\" target=\"_blank\"\u003eES8311 Datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/files.waveshare.com\/wiki\/common\/ES8311.user.Guide.pdf\" target=\"_blank\"\u003eES8311 User guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/files.waveshare.com\/wiki\/common\/ES7210_DS.pdf\" target=\"_blank\"\u003eES7210 Datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/files.waveshare.com\/wiki\/common\/SHTC3_Datasheet.pdf\" target=\"_blank\"\u003eSHTC3 Datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/files.waveshare.com\/wiki\/PhotoPainter%20(B)\/PhotoPainter_B-BMP.zip\" target=\"_blank\"\u003eSample images\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/files.waveshare.com\/wiki\/common\/ConverTo6c_bmp-7.3.zip\" target=\"_blank\"\u003eSix-color dithering image conversion tool\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/files.waveshare.com\/wiki\/PhotoPainter%20(B)\/PhotoPainter_dimension.pdf\" target=\"_blank\"\u003eDimensions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.waveshare.com\/wiki\/ESP32-S3-PhotoPainter\" target=\"_blank\" rel=\"noopener\"\u003eWIKI\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDemo\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/files.waveshare.com\/wiki\/ESP32-S3-PhotoPainter\/ESP32-S3-PhotoPainter-Demo.zip\" target=\"_blank\"\u003eDemo source code\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"nofollow noreferrer noopener\" class=\"external text\" href=\"https:\/\/github.com\/wurongmin\/ESP32-S3-PhotoPainter\" target=\"_blank\"\u003eGithub\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveShare","offers":[{"title":"Default Title","offer_id":50531625926733,"sku":"E54003-001","price":156.38,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54003-win1_9c64909e-a76d-41a8-afc9-83ddc2a6e2ed.jpg?v=1790415128"},{"product_id":"esp32-s3-1-32inch-amoled-round-touch-display-development-board-466-466-pixels-qspi-interface-supports-wi-fi-and-bluetooth-5","title":"ESP32-S3 1.32inch AMOLED Round Touch Display Development Board, 466×466 Pixels, QSPI Interface, Supports Wi-Fi and Bluetooth 5","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003eESP32-S3-Touch-AMOLED-1.32\u003c\/strong\u003e\u003cspan\u003e is a compact 1.32inch AMOLED capacitive touch display development board designed by Waveshare. Onboard power management module, low power audio codec circuit, and MIC, adapting 12PIN expansion I\/O interface, Lithium Batt. header, and speaker header, suitable for applications such as AI voice agents.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli class=\"\"\u003eEquipped with ESP32-S3 high-performance Xtensa 32-bit LX7 dual-core processor, operating at up to 240 MHz.\u003c\/li\u003e\n\u003cli class=\"\"\u003eSupports 2.4GHz Wi-Fi (802.11 b\/g\/n) and Bluetooth 5 (LE) with an onboard antenna.\u003c\/li\u003e\n\u003cli class=\"\"\u003eBuilt-in 512KB SRAM and 384KB ROM, stacked with 8MB PSRAM and 8MB Flash.\u003c\/li\u003e\n\u003cli class=\"\"\u003eFeatures a 1.32inch capacitive touch HD AMOLED display with a resolution of 466 × 466, supporting 16.7 million colors for clear and vibrant image display.\u003c\/li\u003e\n\u003cli class=\"\"\u003eBuilt-in CO5300 driver chip and CST820 capacitive touch controller chip, communicating via QSPI and I2C interfaces respectively, minimizing the use of I\/O pin resources\u003c\/li\u003e\n\u003cli class=\"\"\u003eOnboard two side buttons, PWR and BOOT, with customizable functions for convenient custom button operation development\u003c\/li\u003e\n\u003cli class=\"\"\u003eOnboard 3.7V MX1.25 lithium battery recharge\/discharge header.\u003c\/li\u003e\n\u003cli class=\"\"\u003eIntegrates an ES8311 low-power audio codec chip, supporting high-quality audio input and output for various applications like voice interaction and audio playback.\u003c\/li\u003e\n\u003cli class=\"\"\u003eExposes a 12PIN SH1.0 expansion interface for DIY functional extensions.\u003c\/li\u003e\n\u003cli class=\"\"\u003eUtilizes an AMOLED screen, offering higher contrast, wider viewing angles, richer colors, faster response times, and superior visual effects, along with advantages like a slim design, low power consumption, and flexibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOnboard Resources\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54004-content1.jpg?v=1790415751\" alt=\"\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eESP32-S3-PICO-1-N8R8\u003c\/strong\u003e Wi-Fi and Bluetooth SoC, operating at 240MHz, stacked with 8MB PSRAM and 8MB Flash.\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003ePWR Power Button\u003c\/strong\u003e Can be used with programs to control power when operating on a battery.\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eBOOT Button\u003c\/strong\u003e Hold the BOOT button and power on the device again to enter download mode.\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eMX1.25 2PIN Lithium Battery Header\u003c\/strong\u003e For connecting a lithium battery, enabling battery-powered operation.\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eMX1.25 2PIN Speaker Header\u003c\/strong\u003e Audio signal output, for connecting an external speaker.\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eSH1.0 12PIN Interface\u003c\/strong\u003e For connecting external devices and debugging, allowing flexible peripheral configuration.\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eType-C Interface\u003c\/strong\u003e Used for program flashing and log printing.\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eMicrophone\u003c\/strong\u003e For audio capture.\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eOnboard Ceramic Antenna\u003c\/strong\u003e Supports 2.4 GHz Wi-Fi (802.11 b\/g\/n) and Bluetooth 5 (LE).\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eES8311\u003c\/strong\u003e High-performance, low-power audio codec chip.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eRelated Documents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.waveshare.com\/ESP32-S3-Touch-AMOLED-1.32\" target=\"_blank\" rel=\"noopener\"\u003eWiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveShare","offers":[{"title":"Default Title","offer_id":50531638607949,"sku":"E54004-001","price":41.81,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54004-win1.jpg?v=1790415814"},{"product_id":"esp32-s3-1-64inch-amoled-touch-display-development-board-280-456-qspi-interface-onboard-accelerometer-and-gyroscope-sensor-esp32-with-display","title":"ESP32-S3 1.64inch AMOLED Touch Display Development Board, 280×456, QSPI Interface, Onboard Accelerometer And Gyroscope Sensor, ESP32 With Display","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThis product adopts \u003c\/span\u003e\u003cstrong\u003eESP32-S3R8\u003c\/strong\u003e\u003cspan\u003e chip with 2.4GHz Wi-Fi and Bluetooth BLE 5 support, and integrates high-capacity Flash and PSRAM. Onboard 1.64inch AMOLED display, capable of smoothly running GUI programs such as LVGL. Onboard rich peripheral resources such as QMI8658 6-axis IMU, TF card slot, and Lithium battery header, etc., while also providing USB, UART, I2C and multiple MUX_GPIO interfaces for strong expandability. It is ideal for the quick development of the HMI and other ESP32-S3 applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEquipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency\u003c\/li\u003e\n\u003cli\u003eSupports 2.4GHz Wi-Fi (802.11 b\/g\/n) and Bluetooth 5 (LE), with an onboard antenna. The device allows switching to use an external antenna by resoldering an onboard resistor\u003c\/li\u003e\n\u003cli\u003eBuilt-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM\u003c\/li\u003e\n\u003cli\u003eOnboard 1.64inch AMOLED display, QSPI interface, 280 × 456 resolution, 16.7M color\u003c\/li\u003e\n\u003cli\u003eSupports capacitive touch function, controlled via I2C interface\u003c\/li\u003e\n\u003cli\u003eOnboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for motion gesture detection, step counting, and more\u003c\/li\u003e\n\u003cli\u003eOnboard RST button, along with programmable BOOT button for customizable functionality and flexible development\u003c\/li\u003e\n\u003cli\u003eOnboard 3.7V MX1.25 Lithium battery recharge\/discharge header\u003c\/li\u003e\n\u003cli\u003eOnboard TF card slot, enabling external storage for pictures or files\u003c\/li\u003e\n\u003cli\u003eOnboard USB Type-C port for power supply, program downloading, and debugging, making development more convenient\u003c\/li\u003e\n\u003cli\u003eAdapting I2C, UART, and USB interfaces, for connecting peripherals and debugging\u003c\/li\u003e\n\u003cli\u003eAdopts CNC-machined metal frame for better protection, nice looking and more durable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOnboard Resources\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54005-content1.jpg?v=1790416132\" alt=\"\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eESP32-S3R8\u003c\/strong\u003e Wi-Fi and Bluetooth SoC, 240MHz operating frequency, stacked 8MB PSRAM\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003e16MB NOR-Flash\u003c\/strong\u003e large-capacity Flash storage\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eQMI8658\u003c\/strong\u003e 6-axis inertial measurement unit (IMU), including a 3-axis gyroscope and a 3-axis accelerometer\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003e1.64inch AMOLED Display\u003c\/strong\u003e 280×456 resolution, 16.7M colors, QSPI interface\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eFT3168\u003c\/strong\u003e Capacitive touch controller, I2C interface\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eTF Card Slot\u003c\/strong\u003e For external TF card storage of images or files (supports capacity less than 64G)\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eMX1.25 Lithium Battery Header\u003c\/strong\u003e MX1.25 2P connector for connecting a 3.7V lithium battery, supports charging and discharging\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eType-C Port\u003c\/strong\u003e ESP32-S3 USB port for programming and log printing\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eBOOT Button\u003c\/strong\u003e Supports custom button functions; press and hold to enter download mode\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003eRESET Button\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eRelated Documents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.waveshare.com\/ESP32-S3-Touch-AMOLED-1.64\" target=\"_blank\" rel=\"noopener\"\u003eWiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveShare","offers":[{"title":"Default Title","offer_id":50531648077901,"sku":"E54005-001","price":46.28,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54005-win1.jpg?v=1790416203"},{"product_id":"esp32-s3-1-8inch-amoled-touch-display-development-board-32-bit-lx7-dual-core-processor-368-448-pixels-accelerometer-and-gyroscope-sensor-esp32-with-display","title":"ESP32-S3 1.8inch AMOLED Touch Display Development Board, 32-bit LX7 Dual-core Processor, 368×448 Pixels, Accelerometer And Gyroscope Sensor, ESP32 With Display","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eESP32-S3-Touch-AMOLED-1.8\u003c\/strong\u003e\u003cspan\u003e is a low-cost, high-performance MCU board designed by Waveshare, tiny size, with onboard 1.8inch AMOLED display, power management IC, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC, low power audio codec, and so on, which makes it easy for you to develop and integrate it into the products quickly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEquipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency\u003c\/li\u003e\n\u003cli\u003eSupports 2.4GHz Wi-Fi (802.11 b\/g\/n) and Bluetooth 5 (LE), with onboard antenna\u003c\/li\u003e\n\u003cli\u003eBuilt in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory\u003c\/li\u003e\n\u003cli\u003eType-C connector, improving device compatibility, easier to use\u003c\/li\u003e\n\u003cli\u003eOnboard 1.8inch AMOLED display for clear color picture display, 368 × 448 resolution, 16.7M color\u003c\/li\u003e\n\u003cli\u003eBuilt-in CO5300 display driver and CST820 capacitive touch chip, using QSPI and I2C communication respectively, effectively saving the IO resources\u003c\/li\u003e\n\u003cli\u003eOnboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture, counting steps, etc.\u003c\/li\u003e\n\u003cli\u003eOnboard PCF85063 RTC chip, powered by main Lithium battery through AXP2101 chip, with reserved RTC battery pads for connecting a backup battery, ensuring RTC function during the replacement of the main battery\u003c\/li\u003e\n\u003cli\u003eOnboard PWR and BOOT programmable buttons for easy custom function development\u003c\/li\u003e\n\u003cli\u003eOnboard 3.7V MX1.25 Lithium battery recharge\/discharge header, optional for 3.7V Lithium battery\u003c\/li\u003e\n\u003cli\u003eReserved pads of 7 × GPIO, 1 × I2C, 1 × UART, and 1 × USB interface, for connecting peripherals and debugging\u003c\/li\u003e\n\u003cli\u003eOnboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design\u003c\/li\u003e\n\u003cli\u003eAdopts AXP2101 IC for efficient power management, supports multiple voltage outputs, battery charging, battery management, and battery life optimization, etc.\u003c\/li\u003e\n\u003cli\u003eAdopts AMOLED screen, featuring advantages of high contrast, wide viewing angle, rich colors, fast response, thinner design, and low power consumption, etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOnboard Resource\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54006-content1.jpg?v=1790416519\" alt=\"\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eESP32-S3R8\u003c\/strong\u003e Wi-Fi and Bluetooth SoC, 240MHz operating frequency, stacked 8MB PSRAM\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eQMI8658\u003c\/strong\u003e 6-axis inertial measurement unit (IMU), integrating 3-axis accelerometer and 3-axis gyroscope\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003ePCF85063\u003c\/strong\u003e RTC real-time clock chip\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eAXP2101\u003c\/strong\u003e Highly integrated power management chip\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eES8311\u003c\/strong\u003e Audio codec, driving microphone input and speaker output via I²S interface\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eSpeaker\u003c\/strong\u003e Onboard audio output driven by ES8311\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eBackup battery pad\u003c\/strong\u003e Dedicated pad to keep RTC powered when the main battery is replaced, preventing time loss\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eMX1.25 lithium battery header\u003c\/strong\u003e MX1.25 2P connector for connecting a 3.7V lithium battery, supports charging and discharging\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003e16MB NOR-Flash\u003c\/strong\u003e Mounted via SPI interface, available for storing firmware, UI assets, and user data\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eMicrophone\u003c\/strong\u003e Onboard analog microphone that captures ambient audio, which is converted from analog to digital by the ES8311 and then processed by the ESP32-S3\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eOnboard antenna\u003c\/strong\u003e Supports 2.4 GHz Wi-Fi (802.11 b\/g\/n) and Bluetooth® 5 (LE)\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eReserved GPIO pads (pitch 1.27 mm)\u003c\/strong\u003e Adapting available IO function pins for easy expansion\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eBOOT button\u003c\/strong\u003e Hold during power-on to enter firmware download mode; can be assigned custom functions at runtime\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eType-C port\u003c\/strong\u003e ESP32-S3 USB port for program flashing and log printing\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003ePWR button\u003c\/strong\u003e Controls power on\/off, with support for customizable long-press\/short-press behavior\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eRelated Document\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.waveshare.com\/ESP32-S3-Touch-AMOLED-1.8\" target=\"_blank\" rel=\"noopener\"\u003eWiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveShare","offers":[{"title":"Default Title","offer_id":50531656597581,"sku":"E54006-001","price":52.66,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54006-001.jpg?v=1790416597"},{"product_id":"esp32-s3-2-41inch-amoled-touch-display-development-board-600-450-32-bit-lx7-dual-core-processor-onboard-accelerometer-and-gyroscope-sensor-esp32-with-display","title":"ESP32-S3 2.41inch AMOLED Touch Display Development Board, 600×450, 32-bit LX7 Dual-core Processor, Onboard Accelerometer And Gyroscope Sensor, ESP32 With Display","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThis product adopts \u003c\/span\u003e\u003cstrong\u003eESP32-S3R8\u003c\/strong\u003e\u003cspan\u003e chip with 2.4GHz WiFi and Bluetooth BLE 5 support, and integrates high-capacity Flash and PSRAM. Onboard 2.41inch AMOLED display capable of smoothly running GUI programs such as LVGL. Onboard rich peripheral resources such as RTC chip, QMI8658 6-axis IMU, TF card slot, Lithium battery header, etc., while also providing USB, UART, I2C and 34PIN GPIO header for strong compatibility and expandability. It is ideal for the quick development of the HMI and other ESP32-S3 applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEquipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency\u003c\/li\u003e\n\u003cli\u003eSupports 2.4GHz Wi-Fi (802.11 b\/g\/n) and Bluetooth 5 (LE), with an onboard antenna. The device allows switching to an external antenna by resoldering an onboard resistor\u003c\/li\u003e\n\u003cli\u003eBuilt-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM\u003c\/li\u003e\n\u003cli\u003eOnboard 2.41inch AMOLED display, QSPI interface, 600 × 450 resolution, 16.7M color\u003c\/li\u003e\n\u003cli\u003eSupports capacitive touch function, controlled via I2C interface, with interrupt support\u003c\/li\u003e\n\u003cli\u003eOnboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for motion gesture detection, step counting, and more\u003c\/li\u003e\n\u003cli\u003eOnboard PCF85063 RTC chip with a reserved SH1.0 RTC battery header (supports charging) for RTC functionality\u003c\/li\u003e\n\u003cli\u003eOnboard RST button, along with programmable BOOT and PWR buttons for customizable functionality and flexible development\u003c\/li\u003e\n\u003cli\u003eOnboard 3.7V MX1.25 Lithium battery recharge\/discharge header\u003c\/li\u003e\n\u003cli\u003eOnboard TF card slot, enabling external storage for pictures or files\u003c\/li\u003e\n\u003cli\u003eOnboard USB Type-C port for power supply, program downloading, and debugging, making development more convenient\u003c\/li\u003e\n\u003cli\u003eOnboard UART and I2C SH1.0 4PIN connectors, with a reserved 34PIN 2.54mm pitch GPIO header for expandability\u003c\/li\u003e\n\u003cli\u003eOptional for protection case, with clear and colorful label on the back, nice looking and easy to carry\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOnboard Resource\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54007-content1.jpg?v=1790417548\" alt=\"\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eESP32-S3R8\u003c\/strong\u003e Wi-Fi and Bluetooth SoC, running at 240 MHz, stacked with 8 MB PSRAM\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eW25Q128JVSIQ\u003c\/strong\u003e 16 MB NOR Flash\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003ePCF85063\u003c\/strong\u003e RTC clock chip\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eQMI8658\u003c\/strong\u003e 6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eRM690B0\u003c\/strong\u003e AMOLED display driver chip, QSPI interface\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eFT6336\u003c\/strong\u003e Capacitive touch controller, I2C interface\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eMX1.25 Lithium Battery Header\u003c\/strong\u003e MX1.25 2PIN connector for connecting a 3.7 V lithium battery, supports charging and discharging\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eType-C Port\u003c\/strong\u003e ESP32-S3 USB port for programming and log printing\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eTF Card Slot\u003c\/strong\u003e Supports SPI\/SDMMC mode for external TF card storage of images or files\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003eOnboard antenna\u003c\/strong\u003e Supports 2.4 GHz Wi-Fi (802.11 b\/g\/n) and Bluetooth® 5 (LE)\u003c\/li\u003e\n\u003cli class=\"\"\u003e\n\u003cstrong\u003ePWR Button\u003c\/strong\u003e Power function button, supports power-on detection, single press, and long press\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003eBOOT button\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli class=\"\"\u003e\u003cstrong\u003eRESET Button\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eRelated Document\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.waveshare.com\/ESP32-S3-Touch-AMOLED-2.41\" target=\"_blank\" rel=\"noopener\"\u003eWiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveShare","offers":[{"title":"Default Title","offer_id":50531682254925,"sku":"E54007-001","price":90.32,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54007-win1.jpg?v=1790417626"},{"product_id":"esp32-s3-development-board-with-1-28inch-round-touch-lcd-compact-size-accelerometer-and-gyroscope-sensor","title":"ESP32-S3 Development Board, with 1.28inch Round Touch LCD, Compact size, Accelerometer And Gyroscope Sensor","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eESP32-S3-Touch-LCD-1.28\u003c\/strong\u003e\u003cspan\u003e is a low-cost, high-performance MCU board designed by Waveshare, tiny size, with onboard 1.28inch capacitive touch display, Li-ion battery recharge manager, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), and so on, which makes it easy for you to develop and integrate it into products quickly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEquipped with Xtensa® 32-bit LX7 dual-core processor, up to 240MHz main frequency\u003c\/li\u003e\n\u003cli\u003eSupports 2.4GHz Wi-Fi (802.11 b\/g\/n) and Bluetooth® 5 (BLE), with onboard antenna\u003c\/li\u003e\n\u003cli\u003eBuilt in 512KB of SRAM and 384KB ROM, with onboard 2MB PSRAM and an external 16MB Flash memory\u003c\/li\u003e\n\u003cli\u003eType-C connector, keeps it up to date, easier to use\u003c\/li\u003e\n\u003cli\u003eOnboard 1.28inch capacitive touch display, 240×240 resolution, 65K color\u003c\/li\u003e\n\u003cli\u003eOnboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture\u003c\/li\u003e\n\u003cli\u003eOnboard 3.7V MX1.25 lithium battery recharge\/discharge header\u003c\/li\u003e\n\u003cli\u003eAdapting 6 × GPIO pins via SH1.0 connector\u003c\/li\u003e\n\u003cli\u003eSupports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios\u003c\/li\u003e\n\u003cli\u003eIntegrated with USB serial port full-speed controller, GPIO pins allows flexibly configuring pin functions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOnboard Resources\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54008-content1.jpg?v=1790417996\" alt=\"\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-S3R2 \/ ESP32-S3RH2\u003c\/strong\u003e\u003cbr\u003eThe SoC with WiFi and Bluetooth, up to 240MHz operating frequency, with onboard 2MB PSRAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eW25Q128JVSIQ\u003c\/strong\u003e\u003cbr\u003e16MB NOR-Flash\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCH343P\u003c\/strong\u003e\u003cbr\u003eUSB to UART chip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMP1605\u003c\/strong\u003e\u003cbr\u003epower module, supports up to 3.3V 2A output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eETA6096\u003c\/strong\u003e\u003cbr\u003ehigh-efficiency Lithium battery recharge manager\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQMI8658\u003c\/strong\u003e\u003cbr\u003e6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMX1.25 battery header\u003c\/strong\u003e\u003cbr\u003eMX1.25 2P connector, for 3.7V Lithium battery, supports charging and discharging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Type-C connector\u003c\/strong\u003e\u003cbr\u003esupports USB1.1 hosts and slave devices\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRESET button\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBOOT button\u003c\/strong\u003e\u003cbr\u003ePress it before resetting to enter download mode\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eRelated Document\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.waveshare.com\/ESP32-S3-Touch-LCD-1.28\" target=\"_blank\" rel=\"noopener\"\u003eWiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveShare","offers":[{"title":"Default Title","offer_id":50531688382541,"sku":"E54008-001","price":39.89,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54008-win1.jpg?v=1790418102"},{"product_id":"esp32-s3-1-54inch-lcd-display-development-board-240-240-resolution-262k-color-supports-dual-microphones-2-4ghz-wi-fi-and-ble-5","title":"ESP32-S3 1.54inch LCD Display Development Board, 240 × 240 Resolution, 262K Color, Supports Dual Microphones, 2.4GHz Wi-Fi And BLE 5","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThis product is designed by Waveshare, featuring a custom-molded square plastic case, offering a compact and premium appearance. Onboard 1.54inch LCD display, 6-axis sensor, dual microphones array, and TF card slot, providing the hardware foundation for display, sensing, voice, and multimedia storage. With these hardware resources, it supports fun interactive mini-games, voice wake-up, conversation interruption, noise reduction, and echo cancellation. It allows access to online AI large model platforms, enabling intelligent voice interaction and continuous upgrades. The factory firmware includes built-in functions such as AI conversation, audio and video playback, photo album, text reading, and a gravity ball game. It can be used directly as an AI chatting toy, while also supporting customization and secondary development.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEquipped with high-performance ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency\u003c\/li\u003e\n\u003cli\u003eSupports 2.4GHz Wi-Fi (802.11 b\/g\/n) and Bluetooth 5 (LE), with onboard antenna\u003c\/li\u003e\n\u003cli\u003eBuilt-in 512KB Static RAM, 384KB ROM, with onboard 8MB PSRAM and external 16MB flash\u003c\/li\u003e\n\u003cli\u003eType-C port, improving device compatibility, easier to use\u003c\/li\u003e\n\u003cli\u003eOnboard 1.54inch LCD display for clear color picture display, 240 × 240 resolution, 262K color\u003c\/li\u003e\n\u003cli\u003eOnboard ES7210 audio encoding chip for dual microphones audio capture and echo cancellation\u003c\/li\u003e\n\u003cli\u003eOnboard ES8311 audio codec chip, NS4150B amplifier chip, microphones, and speaker\u003c\/li\u003e\n\u003cli\u003eOnboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gesture to expand applications\u003c\/li\u003e\n\u003cli\u003eAdapting I2C, UART, and other pin pads for external device connection and debugging, enabling flexible peripheral configuration\u003c\/li\u003e\n\u003cli\u003eOnboard three customizable function buttons for operations such as single-click, double-click, and long press\u003c\/li\u003e\n\u003cli\u003eOnboard 3.7V MX1.25 Lithium Batt recharge\/discharge header\u003c\/li\u003e\n\u003cli\u003eOnboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOnboard Resources\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54009-content1.jpg?v=1790418383\" alt=\"\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-S3R8\u003c\/strong\u003e\u003cbr\u003edual-core processor, up to 240MHz operating frequency\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e16MB NOR-Flash\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNS4150B\u003c\/strong\u003e\u003cbr\u003eaudio power amplifier chip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eES8311\u003c\/strong\u003e\u003cbr\u003elow power audio codec chip\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eES7210\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBatt recharge and discharge management chip\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQMI8658\u003c\/strong\u003e\u003cbr\u003e6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePLUS button\u003c\/strong\u003e\u003cbr\u003ecustom button\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePWR button\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBOOT button\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMicrophones\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTF card slot\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOnboard antenna\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMX1.25 Lithium Batt header\u003c\/strong\u003e\u003cbr\u003eMX1.25 2PIN connector, for 3.7 Lithium Batt, supports charging and discharging\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eType-C port\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMX1.25 speaker header\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1.54inch display panel connector\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eRelated Document\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.waveshare.com\/ESP32-S3-Touch-LCD-1.54\" target=\"_blank\" rel=\"noopener\"\u003eWiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveShare","offers":[{"title":"Default Title","offer_id":50531693723725,"sku":"E54009-001","price":33.19,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54009-win1.jpg?v=1790418772"},{"product_id":"esp32-s3-1-85inch-round-lcd-development-board-360-360-supports-wi-fi-bluetooth-ble-5-ai-speech-smart-speaker-box-esp32-with-display","title":"ESP32-S3 1.85inch Round LCD Development Board, 360×360, Supports Wi-Fi \u0026 Bluetooth BLE 5, AI Speech, Smart Speaker Box, ESP32 With Display","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eESP32-S3-Touch-LCD-1.85C\u003c\/strong\u003e\u003cspan\u003e is a microcontroller development board with 2.4GHz Wi-Fi and Bluetooth BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 1.85inch LCD display which can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, it is suitable for the quick development of the HMI and other ESP32-S3 applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEquipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency\u003c\/li\u003e\n\u003cli\u003eSupports 2.4GHz Wi-Fi (802.11 b\/g\/n) and Bluetooth 5 (LE), with onboard antenna\u003c\/li\u003e\n\u003cli\u003eBuilt-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM\u003c\/li\u003e\n\u003cli\u003eOnboard 1.85inch LCD display, 360×360 resolution, 262K color\u003c\/li\u003e\n\u003cli\u003eSupports capacitive touch controlled via I2C interface, with interrupt support\u003c\/li\u003e\n\u003cli\u003eAdapting UART, I2C and some IO interfaces\u003c\/li\u003e\n\u003cli\u003eOnboard audio codec chip, dual microphones, RTC sensor, TF card slot and battery recharge management module, etc.\u003c\/li\u003e\n\u003cli\u003eSupports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOnboard Resource\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54010-content1.jpg?v=1790419129\" alt=\"\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-S3R8\u003c\/strong\u003e\u003cbr\u003eDual-core processor, up to 240MHz operating frequency\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e16MB Flash\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTCA9554PWR\u003c\/strong\u003e\u003cbr\u003eGPIO expander chip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRTC chip\u003c\/strong\u003e\u003cbr\u003ePCF85063 RTC chip\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier chip\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePCM5101 audio decoder\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBattery recharge manager\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMP1605GTF-Z\u003c\/strong\u003e\u003cbr\u003ePower module, supports up to 3.3V 2A output\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolume adjustment knob\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTF card slot\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPEX1 connector\u003c\/strong\u003e\u003cbr\u003eSwitching to use the external antenna via resoldering an onboard resistor\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOnboard ceramic antenna\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBattery power supply ON\/OFF\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSpeaker header\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMicrophone\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMX1.25 battery header\u003c\/strong\u003e\u003cbr\u003eMX1.25 2PIN connector, for 3.7V Lithium battery, supports charging and discharging\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUART header\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower indicator\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUSB Type-C port\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge indicator\u003c\/strong\u003e\u003cbr\u003eLithium battery charge indicator, lights up when charging, off when fully charged (the light status is uncertain when the battery is not connected)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI2C header\u003c\/strong\u003e\u003cbr\u003econnecting with internal chip, only supports the I2C peripherals and cannot be mapped to other functions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRTC battery header\u003c\/strong\u003e\u003cbr\u003efor connecting rechargeable \u003ca href=\"https:\/\/www.waveshare.com\/rtc-battery.htm\" target=\"_blank\"\u003eRTC battery\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.27mm pin header\u003c\/strong\u003e\u003cbr\u003eReserved 28PIN header, adapting GPIO and other function pins\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRESET button\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBOOT button\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eRelated Document\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.waveshare.com\/ESP32-S3-Touch-LCD-1.85C\" target=\"_blank\" rel=\"noopener\"\u003eWiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveShare","offers":[{"title":"Default Title","offer_id":50531706241101,"sku":"E54010-001","price":62.23,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54010-win1.jpg?v=1790419244"},{"product_id":"esp32-s3-2-8inch-display-development-board-240-320-ips-32-bit-lx7-dual-core-processor-up-to-240mhz-frequency-supports-wifi-bluetooth-with-onboard-antenna-esp32-with-display","title":"ESP32-S3 2.8inch Display Development Board, 240×320, IPS, 32-bit LX7 Dual-core Processor, Up to 240MHz Frequency, Supports WiFi \u0026 Bluetooth, With Onboard Antenna, ESP32 With Display","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThis product is a microcontroller development board with 2.4GHz WiFi and Bluetooth BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 2.8inch LCD screen (optional for touch function) can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eFeature\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEquipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency\u003c\/li\u003e\n\u003cli\u003eSupports 2.4GHz Wi-Fi (802.11 b\/g\/n) and Bluetooth 5 (LE), with onboard antenna\u003c\/li\u003e\n\u003cli\u003eBuilt-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM\u003c\/li\u003e\n\u003cli\u003eOnboard 2.8inch LCD display, 240×320 resolution, 262K color\u003c\/li\u003e\n\u003cli\u003eOptional for capacitive touch function controlled via I2C interface, 5-point touch, with interrupt support\u003c\/li\u003e\n\u003cli\u003eAdapting UART, I2C and some IO interfaces, integrates full-speed USB port\u003c\/li\u003e\n\u003cli\u003eOnboard speaker, QMI8658 6-axis sensor, RTC sensor, TF card slot and battery recharge management module, etc.\u003c\/li\u003e\n\u003cli\u003eSupports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOnboard Resrouce\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54011-content1.jpg?v=1790419566\" alt=\"\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-S3R8\u003c\/strong\u003e\u003cbr\u003edual-core processor, up to 240MHz operating frequency\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e16MB Flash\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQST attitude sensor\u003c\/strong\u003e\u003cbr\u003eQMI8658C (6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRTC chip\u003c\/strong\u003e\u003cbr\u003ePCF85063 RTC chip\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePCM5101 audio decoder\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier chip\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eVolume adjustment knob\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBattery recharge manager\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eME6217C33M5G\u003c\/strong\u003e\u003cbr\u003eLow dropout regulator, 800mA output (Max.)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOnboard ceramic antenna\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPEX1 connector and switching resistor\u003c\/strong\u003e\u003cbr\u003eSwitching to use external antenna via resoldering the resistor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTF card slot\u003c\/strong\u003e\u003cbr\u003eSupports TF card up to 16GB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery power supply control button\u003c\/strong\u003e\u003cbr\u003eRelevant driver program is required\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRESET button\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBOOT button\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUSB Type-C port\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e12PIN multi-functional pin header\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI2C header\u003c\/strong\u003e\u003cbr\u003econnecting with internal chip, only supports the I2C peripherals and cannot be mapped to other functions\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUART header\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMX1.25 battery header\u003c\/strong\u003e\u003cbr\u003eMX1.25 2PIN connector, for 3.7V Lithium battery, supports charging and discharging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRTC battery header\u003c\/strong\u003e\u003cbr\u003efor connecting rechargeable RTC battery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker header\u003c\/strong\u003e\u003cbr\u003eComes with 8Ω 2W 2030 speaker\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower indicator\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharge indicator\u003c\/strong\u003e\u003cbr\u003eLithium battery charge indicator, lights up when charging, off when fully charged (the light status is uncertain when the battery is not connected)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eRelated Document\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.waveshare.com\/ESP32-S3-LCD-2.8\" rel=\"noopener\" target=\"_blank\"\u003eWiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"WaveShare","offers":[{"title":"Default Title","offer_id":50531706863693,"sku":"E54011-001","price":46.28,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54011-win1.jpg?v=1790419678"},{"product_id":"esp32-s3-3-5inch-capacitive-touch-display-development-board-320-480-pixels-ips-panel-262k-color-onboard-camera-interface-supports-wi-fi-and-bluetooth-5-esp32-with-display-1","title":"ESP32-S3 3.5inch Capacitive Touch Display Development Board, 320×480 Pixels, IPS Panel, 262K Color, Onboard Camera Interface, Supports Wi-Fi and Bluetooth 5, ESP32 With Display","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eESP32-S3-Touch-LCD-3.5\u003c\/strong\u003e\u003cspan\u003e is a high-performance, highly integrated MCU board designed by Waveshare. Onboard 3.5inch capacitive touch IPS display, power management IC, 6-axis sensor (3-axis accelerometer and 3-axis gyroscope), RTC, low power audio codec, and so on, which makes it easy for you to develop and integrate into the products quickly.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eFeature\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEquipped with ESP32-S3R8 Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency\u003c\/li\u003e\n\u003cli\u003eSupports 2.4GHz Wi-Fi (802.11 b\/g\/n) and Bluetooth 5 (LE), with onboard antenna\u003c\/li\u003e\n\u003cli\u003eBuilt in 512KB of SRAM and 384KB ROM, with onboard 8MB PSRAM and an external 16MB Flash memory\u003c\/li\u003e\n\u003cli\u003eType-C connector, improving device compatibility, easier to use\u003c\/li\u003e\n\u003cli\u003eOnboard 3.5inch capacitive touch display for clear color picture display, 320 × 480 resolution, 262K color\u003c\/li\u003e\n\u003cli\u003eBuilt-in ST7796 display driver and FT6336 capacitive touch chip, using SPI and I2C communication respectively, effectively saving the IO resources\u003c\/li\u003e\n\u003cli\u003eOnboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures\u003c\/li\u003e\n\u003cli\u003eOnboard PCF85063 RTC chip, powered by main Lithium battery through AXP2101 chip, with reserved RTC battery header for connecting a backup battery, ensuring RTC function during the replacement of the main battery\u003c\/li\u003e\n\u003cli\u003eOnboard PWR and BOOT programmable buttons for easy custom function development\u003c\/li\u003e\n\u003cli\u003eOnboard 3.7V MX1.25 Lithium battery recharge\/discharge header\u003c\/li\u003e\n\u003cli\u003eAdapting I2C, UART, USB, and multiple GPIO pins, for connecting peripherals and debugging\u003c\/li\u003e\n\u003cli\u003eOnboard TF card slot for extended storage and fast data transfer, suitable for applications such as data recording and media playback, simplifying circuit design\u003c\/li\u003e\n\u003cli\u003eOnboard camera interface, compatible with mainstream cameras such as OV5640\u003c\/li\u003e\n\u003cli\u003eAdopts AXP2101 IC for efficient power management, supports multiple voltage outputs, battery charging, battery management, and battery life optimization, etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOnboard Resource\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54012-content1.jpg?v=1790421298\" alt=\"\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-S3R8\u003c\/strong\u003e\u003cbr\u003eThe SoC with WiFi and Bluetooth, up to 240MHz operating frequency, with onboard 8MB PSRAM\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOnboard antenna\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eW25Q128JVSIQ\u003c\/strong\u003e\u003cbr\u003e16MB NOR-Flash\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera interface\u003c\/strong\u003e\u003cbr\u003eSupports mainstream cameras such as OV5640\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTF card slot\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPEX 1 antenna connector\u003c\/strong\u003e\u003cbr\u003eReserved connector, enabled via resoldering an onboard resistor\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMX1.25 speaker header\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBOOT button\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRESET button\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePWR button\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAXP2101\u003c\/strong\u003e\u003cbr\u003eHighly integrated power management IC\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCharge indicator\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUSB Type-C port\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eES8311\u003c\/strong\u003e\u003cbr\u003eLow power audio codec chip\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply indicator\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMicrophone\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSH1.0 RTC battery header\u003c\/strong\u003e\u003cbr\u003efor connecting rechargeable RTC battery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMX1.25 Lithium battery header\u003c\/strong\u003e\u003cbr\u003eMX1.25 2P connector, for 3.7V Lithium battery, supports charging and discharging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.54mm pitch GPIO header\u003c\/strong\u003e\u003cbr\u003eAdapting available IO function pins for easy expansion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCF85063\u003c\/strong\u003e\u003cbr\u003eRTC chip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQMI8658\u003c\/strong\u003e\u003cbr\u003e6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eRelated Document\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.waveshare.com\/ESP32-S3-Touch-LCD-3.5\" target=\"_blank\" rel=\"noopener\"\u003eWiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveShare","offers":[{"title":"Default Title","offer_id":50531713810509,"sku":"E54012-001","price":49.47,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54012-win1.jpg?v=1790421401"},{"product_id":"esp32-s3-4inch-display-development-board-480-480-32-bit-lx7-dual-core-processor-up-to-240mhz-frequency-supports-wifi-bluetooth-with-onboard-antenna-esp32-with-display","title":"ESP32-S3 4inch Display Development Board, 480×480, 32-Bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Supports WiFi \u0026 Bluetooth, With Onboard Antenna, ESP32 With Display","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eESP32-S3-LCD-4\u003c\/strong\u003e\u003cspan\u003e is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates 16MB Flash and 8MB PSRAM. Onboard 4inch 480 × 480 LCD screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces to quickly develop the HMI of ESP32-S3, suitable for scenarios such as smart control panel, home gateway, intelligent interactive panel, industrial control, and smart lighting control.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEquipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency\u003c\/li\u003e\n\u003cli\u003eSupports 2.4GHz Wi-Fi (802.11 b\/g\/n) and Bluetooth 5 (LE), with onboard antenna\u003c\/li\u003e\n\u003cli\u003eBuilt in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM\u003c\/li\u003e\n\u003cli\u003eOnboard 4inch LCD display, 480×480 resolution, 65K color\u003c\/li\u003e\n\u003cli\u003eSupports capacitive touch control via I2C interface, 5-point touch with interrupt support (for touch version only)\u003c\/li\u003e\n\u003cli\u003eOnboard CAN, RS485, I2C interface and TF card slot, and integrates full-speed USB port\u003c\/li\u003e\n\u003cli\u003eSupports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOnboard Resource\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54013-content1.jpg?v=1790421672\" alt=\"\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-S3N16R8\u003c\/strong\u003e\u003cbr\u003eThe SoC with WiFi and Bluetooth, up to 240MHz operating frequency, integrated 8MB PSRAM and 16MB Flash\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBatt charging and discharging chip\u003c\/strong\u003e\u003cbr\u003esupports Batt charging and discharging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTJA1051T\/3\/1J\u003c\/strong\u003e\u003cbr\u003eCAN transceiver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS485 chip\u003c\/strong\u003e\u003cbr\u003eRS485 transceiver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCF85063\u003c\/strong\u003e\u003cbr\u003eRTC chip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCH32\u003c\/strong\u003e\u003cbr\u003eIO expansion chip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXL1509-ADJE1 power chip\u003c\/strong\u003e\u003cbr\u003eSupports 7~36V DC power input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5mm 10pin screw terminal slot\u003c\/strong\u003e\u003cbr\u003efor installing 3.5mm 10pin screw terminal block\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRTC battery header\u003c\/strong\u003e\u003cbr\u003efor connecting rechargeable RTC battery (only supports rechargeable RTC battery)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Type-C port\u003c\/strong\u003e\u003cbr\u003eESP32-S3 USB interface, for power supply, burning program and printing logs\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTF card slot\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePH2.0 Lithium battery header\u003c\/strong\u003e\u003cbr\u003ePH2.0 2P connector, for 3.7V Lithium battery, supports charging and discharging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuzzer\u003c\/strong\u003e\u003cbr\u003esound-producing peripheral\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS485 and CAN terminal resistor selection\u003c\/strong\u003e\u003cbr\u003eclose by defaul\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower supply indicator\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBOOT button\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRESET button\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePWRKEY button\u003c\/strong\u003e\u003cbr\u003ePower ON\/OFF button when using battery for power supply\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eRelated Document\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/www.waveshare.com\/wiki\/ESP32-S3-Touch-LCD-4\" target=\"_blank\" rel=\"noopener\"\u003eWiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveShare","offers":[{"title":"Default Title","offer_id":50531716104269,"sku":"E54013-001","price":59.04,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54013-win1.jpg?v=1790421766"},{"product_id":"esp32-s3-5inch-display-development-board-32-bit-lx7-dual-core-processor-up-to-240mhz-frequency-supports-wifi-bluetooth-with-onboard-antenna-esp32-with-display","title":"ESP32-S3 5inch Display Development Board, 32-Bit LX7 Dual-Core Processor, Up To 240MHz Frequency, Supports WiFi \u0026 Bluetooth, With Onboard Antenna, ESP32 With Display","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThis product is a microcontroller development board with 2.4GHz WiFi and BLE 5 support, integrates high-capacity Flash and PSRAM. Onboard 5inch LCD screen can smoothly run GUI programs such as LVGL. Combined with various peripheral interfaces, suitable for the quick development of the HMI and other ESP32-S3 applications\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEquipped with Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency\u003c\/li\u003e\n\u003cli\u003eSupports 2.4GHz Wi-Fi (802.11 b\/g\/n) and Bluetooth 5 (LE), with onboard antenna\u003c\/li\u003e\n\u003cli\u003eBuilt in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM\u003c\/li\u003e\n\u003cli\u003eOnboard 5inch LCD display, options for 800×480\/1024x600 resolution, 65K color\u003c\/li\u003e\n\u003cli\u003eSupports capacitive touch control via I2C interface, 5-point touch with interrupt support (for touch version only)\u003c\/li\u003e\n\u003cli\u003eOnboard voltage regulator, supports 7~36V wide range power supply\u003c\/li\u003e\n\u003cli\u003eOnboard RTC chip and battery holder, ensuring time data is not lost when power loss (RTC battery required)\u003c\/li\u003e\n\u003cli\u003eOnboard CAN, RS485, I2C interface, TF card slot, MX1.25 2P battery header, and digital isolated IO interfaces, etc.\u003c\/li\u003e\n\u003cli\u003eSupports passive and active digital input, with bi-directional optocoupler isolation\u003c\/li\u003e\n\u003cli\u003eSupports digital output with optocoupler isolation, provides higher driving capability with up to 450mA sinking current\u003c\/li\u003e\n\u003cli\u003eOnboard LED indicators for indicating the power and battery recharging status\u003c\/li\u003e\n\u003cli\u003eSupports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOnboard Resource\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54014-content1.jpg?v=1790422102\" alt=\"\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-S3-WROOM-1-N16R8\u003c\/strong\u003e\u003cbr\u003eThe SoC with WiFi and Bluetooth, up to 240MHz operating frequency, integrated 8MB PSRAM and 16MB Flash\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTF card slot\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUSB Type-C port\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBOOT button\u003c\/strong\u003e\u003cbr\u003ePress and hold while powering on for program burning\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRESET button\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOptocoupler isolation\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTouch panel connector\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e5inch display panel connector\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRS485 and CAN terminal resistors selection\u003c\/strong\u003e\u003cbr\u003eclose by default\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBattery power supply ON\/OFF\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e3.7V single lithium battery GH1.25 header\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatus Indicators\u003c\/strong\u003e\u003cbr\u003eDONE: Lithium battery charging completed indicator\u003cbr\u003eCHG: Lithium battery charging indicator\u003cbr\u003ePWR: Power supply indicator\u003cbr\u003e(the CHG will blink and DONE will light on when connecting with DC power supply and without lithium battery connected or battery switch is OFF)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e7-36V DC power supply terminal\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI2C interface terminal\u003c\/strong\u003e\u003cbr\u003eVOUT pin output 5V\/3.3V (switching by onboard resistor)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCAN interface terminal\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRS485 interface terminal\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital output\u003c\/strong\u003e\u003cbr\u003e5~36V, open-drain output, output load: 450mA per channel (MAX)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput signal common terminal\u003c\/strong\u003e\u003cbr\u003eNC: dry contact passive input\u003cbr\u003eConnect to power supply positive: digital input low active, for NPN wet contact active input, 5V-36V DC\u003cbr\u003eConnect to power supply negative: digital input high active, for PNP dry contact active input, 5V-36V DC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDigital input\u003c\/strong\u003e\u003cbr\u003e5~36V, supports passive \/ active input (NPN or PNP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI2C VOUT output selection\u003c\/strong\u003e\u003cbr\u003efor switching output valtage and I\/O level of I2C VOUT, 3.3V by default\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRTC battery holder\u003c\/strong\u003e\u003cbr\u003eCompatible with CR927 battery\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eRelated Document\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.waveshare.com\/ESP32-S3-Touch-LCD-5\" target=\"_blank\" rel=\"noopener\"\u003eWiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveShare","offers":[{"title":"Default Title","offer_id":50531716300877,"sku":"E54014-001","price":71.81,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54014-win1.jpg?v=1790422183"},{"product_id":"esp32-s3-7inch-display-development-board-type-b-esp32-with-display-1024-600-optional-for-touch-function-32-bit-lx7-dual-core-processor-up-to-240mhz-frequency-supports-wifi-bluetooth","title":"ESP32-S3 7inch Display Development Board Type B, ESP32 With Display, 1024×600, Optional For Touch Function, 32-bit LX7 Dual-core Processor, Up to 240MHz Frequency, Supports WiFi \u0026 Bluetooth","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThis product is a microcontroller development board that supports 2.4GHz Wi-Fi and Bluetooth BLE 5, integrates high-capacity Flash and PSRAM. Onboard 7inch LCD display can smoothly run GUI programs such as LVGL. Combined with multiple peripheral interfaces, it is suitable for rapid development of ESP32-S3 HMI applications.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEquipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency\u003c\/li\u003e\n\u003cli\u003eSupports 2.4GHz Wi-Fi (802.11 b\/g\/n) and Bluetooth 5 (LE), with onboard antenna\u003c\/li\u003e\n\u003cli\u003eBuilt-in 512KB SRAM and 384KB ROM, with onboard 16MB Flash and 8MB PSRAM\u003c\/li\u003e\n\u003cli\u003eOnboard 7inch LCD display, 1024 × 600 resolution, 65K color\u003c\/li\u003e\n\u003cli\u003eSupports 5-point capacitive touch control via I2C interface, with interrupt support (for touch version only)\u003c\/li\u003e\n\u003cli\u003eOnboard CAN, RS485, I2C interface and TF card slot, integrates full-speed USB port\u003c\/li\u003e\n\u003cli\u003eLED indicators for easy monitoring of power status and battery charging status\u003c\/li\u003e\n\u003cli\u003eSupports backlight adjustment and real-time battery voltage monitoring\u003c\/li\u003e\n\u003cli\u003eSupports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOnboard Resource\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54015-content1.jpg?v=1790422535\" alt=\"\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-S3-WROOM-1-N16R8 module\u003c\/strong\u003e\u003cbr\u003eThe SoC with WiFi and Bluetooth, up to 240MHz operating frequency, integrated 8MB PSRAM and 16MB Flash\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDisplay panel connector\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTouch panel connector\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTF card slot\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eUSB Type-C port\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUART1 Port\u003c\/strong\u003e\u003cbr\u003eUSB TO UART Type-C port\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUART2 header\u003c\/strong\u003e\u003cbr\u003eUART1 and UART2 are the same UART, selected by switch\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eI2C header\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSensor header\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCAN header\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRS485 header\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e5V output\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e3.7V Lithium battery PH2.0 header\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCAN terminal resistor selection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRS485 terminal resistor selection\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUART selection\u003c\/strong\u003e\u003cbr\u003eselect UART1 or UART2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBOOT button\u003c\/strong\u003e\u003cbr\u003ePress and hold while powering on for program burning\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRESET button\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDONE\u003c\/strong\u003e\u003cbr\u003eLithium battery charging completed indicator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCHARGE\u003c\/strong\u003e\u003cbr\u003eLithium battery charging indicator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePOWER\u003c\/strong\u003e\u003cbr\u003ePower supply indicator\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eRelated Document\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.waveshare.com\/ESP32-S3-Touch-LCD-7B\" target=\"_blank\" rel=\"noopener\"\u003eWiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveShare","offers":[{"title":"Default Title","offer_id":50531727016013,"sku":"E54015-001","price":71.81,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54015-win1.jpg?v=1790422617"},{"product_id":"esp32-s3-7inch-ai-voice-touch-display-development-board-800-480-resolution-5-point-touch-ips-display-panel-supports-2-4ghz-wi-fi-ble-5","title":"ESP32-S3 7inch AI Voice Touch Display Development Board, 800 × 480 Resolution, 5-Point Touch, IPS Display Panel, Supports 2.4GHz Wi-Fi \u0026 BLE 5","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eESP32-S3-Touch-LCD-7C-BOX\u003c\/strong\u003e integrates a 7inch capacitive touch display and an audio module, supporting AI speech interaction and the LVGL graphical interface. Combining display, touch, and voice in one device, it enables easy development of intelligent human-machine interaction terminals.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEquipped with high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency\u003c\/li\u003e\n\u003cli\u003eSupports 2.4GHz Wi-Fi (802.11 b\/g\/n) and Bluetooth 5 (LE), with onboard antenna\u003c\/li\u003e\n\u003cli\u003eBuilt-in 512KB Static RAM and 384KB ROM, with onboard 32MB Flash and 16MB PSRAM\u003c\/li\u003e\n\u003cli\u003eOnboard 7inch capacitive touch display, 800 × 480 resolution, 65K color\u003c\/li\u003e\n\u003cli\u003eSupports capacitive touch control via I2C interface, 5-point touch with interrupt support\u003c\/li\u003e\n\u003cli\u003eOnboard ES8389 audio codec chip and ES7210 echo cancellation circuit\u003c\/li\u003e\n\u003cli\u003eOnboard voltage regulator, supports 7 ~ 36V wide voltage power supply\u003c\/li\u003e\n\u003cli\u003eOnboard RTC chip and Batt holder to ensure time data is not lost during power loss when Batt is installed\u003c\/li\u003e\n\u003cli\u003eOnboard BQ27220 fuel gauge for real-time Batt capacity monitoring\u003c\/li\u003e\n\u003cli\u003eOnboard I2C interface, TF card slot, PH2.0 Batt header, etc.\u003c\/li\u003e\n\u003cli\u003eOnboard LED indicators for indicating the power and Batt recharging status, with a programmable STA indicator\u003c\/li\u003e\n\u003cli\u003eSupports flexible clock, module power supply independent setting and other controls to realize low power consumption in different scenarios\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOnboard Resource\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54016-content1.jpg?v=1790423153\" alt=\"\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-S3-WROOM-2-N32R16\u003c\/strong\u003e\u003cbr\u003eIntegrated 2.4GHz Wi-Fi and Bluetooth 5, dual-core processor with up to 240MHz operating frequency, built-in 32MB Flash and 16MB PSRAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7inch display panel connector\u003c\/strong\u003e\u003cbr\u003efor connecting LCD display\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTouch panel connector\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eES8389 audio codec\u003c\/strong\u003e\u003cbr\u003efor audio signal acquisition, processing, and output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eES7210 audio capture chip\u003c\/strong\u003e\u003cbr\u003efor microphone audio capture, enabling analog-to-digital conversion of audio signals\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Type-C port\u003c\/strong\u003e\u003cbr\u003efor program downloading, serial communication, and 5V power input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatus indicators\u003c\/strong\u003e\u003cbr\u003ePWR: Power supply indicator\u003cbr\u003eCHG: Lithium Batt charging indicator\u003cbr\u003eSTA: programmable status indicator\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.5mm headphone jack\u003c\/strong\u003e\u003cbr\u003efor headphones or active speakers, CTIA standard by default, with microphone support\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual microphones array\u003c\/strong\u003e\u003cbr\u003efor voice capture and speech recognition applications\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOnboard IO expansion controller\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDual MX1.25 speaker headers\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpansion IO screw terminal\u003c\/strong\u003e\u003cbr\u003efor connecting external sensors and functional modules\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eI2C screw terminal\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5V voltage output screw terminal\u003c\/strong\u003e\u003cbr\u003efor external device power supply\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7 ~ 36V DC power supply screw terminal\u003c\/strong\u003e\u003cbr\u003eSupports wide voltage DC power supply\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTF card slot\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBOOT\/RESET button\u003c\/strong\u003e\u003cbr\u003efor programming mode and reset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBatt power supply ON\/OFF\u003c\/strong\u003e\u003cbr\u003efor switching Lithium Batt power on\/off\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eLithium Batt PH2.0 header\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRTC Batt holder\u003c\/strong\u003e\u003cbr\u003esupports CR927 button cell Batt for RTC power-off retention\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eRelated Document\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.waveshare.com\/ESP32-S3-Touch-LCD-7C-BOX\" target=\"_blank\" rel=\"noopener\"\u003eWiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveShare","offers":[{"title":"Default Title","offer_id":50532332208205,"sku":"E54016-001","price":93.83,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54016-win1.jpg?v=1790423254"},{"product_id":"esp32-s3-3-97inch-e-paper-development-board-800-480-resolution-supports-wi-fi-ble-5-and-ai-voice-interaction-onboard-microphone","title":"ESP32-S3 3.97inch e-Paper Development Board, 800 × 480 Resolution, Supports Wi-Fi \/ BLE 5, And AI Voice Interaction, Onboard Microphone","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003eESP32-S3-ePaper-3.97\u003c\/strong\u003e\u003c\/span\u003e is a high-performance, highly integrated microcontroller development board designed by Waveshare. Equipped with an ESP32-S3 microcontroller, supports dual-mode Wi-Fi and BLE communication. Onboard 3.97inch e-paper display, features ultra-low power consumption and ambient light readability, suitable for portable devices and long-Batt-life scenarios. Integrated with an RTC chip, SHTC3 temperature and humidity sensor, TF card slot, low-power audio codec chip circuit, and Lithium Batt recharge management circuit. It provides a flexible and reliable development platform for IoT terminals, electronic tags, portable displays, and other applications.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdopts ESP32-S3R8 high-performance Xtensa 32-bit LX7 dual-core processor, up to 240MHz main frequency\u003c\/li\u003e\n\u003cli\u003eSupports 2.4GHz Wi-Fi (802.11 b\/g\/n) and Bluetooth 5 (LE), with onboard antenna\u003c\/li\u003e\n\u003cli\u003eBuilt-in 512KB Static RAM, 384KB ROM, with integrated 8MB PSRAM and external 16MB Flash\u003c\/li\u003e\n\u003cli\u003eOnboard 3.97inch e-paper display, 800 × 480 resolution, features high contrast and wide viewing angle\u003c\/li\u003e\n\u003cli\u003eOnboard audio codec chip, supports voice capture and playback, enabling AI voice interaction applications\u003c\/li\u003e\n\u003cli\u003eOnboard QMI8658 6-axis IMU (3-axis accelerometer and 3-axis gyroscope) for detecting motion gestures, counting steps, etc.\u003c\/li\u003e\n\u003cli\u003eOnboard PCF85063 RTC chip and SHTC3 temperature \u0026amp; humidity sensor for accurate RTC management and environmental monitoring\u003c\/li\u003e\n\u003cli\u003eOnboard TG28 power management chip, supports 3.7V MX1.25 Lithium Batt for uninterrupted power supply, with a reserved backup Batt header to ensure continuous RTC functionality during main Batt replacement\u003c\/li\u003e\n\u003cli\u003eAdopts TG28 chip for efficient power management, supports multiple voltage outputs, Batt charging, Batt management, and Batt life optimization, etc.\u003c\/li\u003e\n\u003cli\u003eType-C port, improving device compatibility, easier to use\u003c\/li\u003e\n\u003cli\u003eOnboard TF card slot for storage expansion and rapid data transfer, suitable for data logging, media playback, and other applications, simplifying circuit design\u003c\/li\u003e\n\u003cli\u003eOnboard programmable PWR and BOOT side buttons for customized function development\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOnboard Document\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54017-content1.jpg?v=1790423606\" alt=\"\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-S3-WROOM-1-N16R8\u003c\/strong\u003e\u003cbr\u003eWi-Fi and Bluetooth SoC, 240MHz operating frequency, with integrated 8MB Flash and 16MB PSRAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSHTC3 temperature and humidity sensor\u003c\/strong\u003e\u003cbr\u003eprovides ambient temperature and humidity measurement, enabling environmental monitoring function\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCF85063\u003c\/strong\u003e\u003cbr\u003eRTC chip with timekeeping function\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRotary button\u003c\/strong\u003e\u003cbr\u003esupports customizable button functions in three directions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePWR button\u003c\/strong\u003e\u003cbr\u003eenables power control via software configuration when using Lithium Batt for power supply\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBOOT button\u003c\/strong\u003e\u003cbr\u003epress it when powering on to enter download mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNS4150B\u003c\/strong\u003e\u003cbr\u003eAudio amplifier chip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eES8311\u003c\/strong\u003e\u003cbr\u003elow-power audio codec chip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQMI8658\u003c\/strong\u003e\u003cbr\u003e6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMX1.25 speaker header\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMX1.25 RTC backup Batt header\u003c\/strong\u003e\u003cbr\u003efor powering the RTC when the main Lithium Batt is not connected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMX1.25 Lithium Batt header\u003c\/strong\u003e\u003cbr\u003eMX1.25 2PIN connector for connecting 3.7V Lithium Batt, supports charging and discharging\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e3.97inch e-paper display interface\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTG28\u003c\/strong\u003e\u003cbr\u003ehighly integrated power management chip\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eMicrophone\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eType-C port\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTF card slot\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eRelated Document\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.waveshare.com\/ESP32-S3-ePaper-3.97\" target=\"_blank\" rel=\"noopener\"\u003eWiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveShare","offers":[{"title":"Default Title","offer_id":50532542021709,"sku":"E54017-001","price":62.87,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54017-win1.jpg?v=1790423701"},{"product_id":"esp32-p4-wifi6-3-5inch-smart-vision-development-board-320-480-resolution-equipped-with-ov5647-5mp-camera-built-in-microphone-and-speaker-supports-wi-fi-6-and-ble-5","title":"ESP32-P4-WIFI6 3.5inch Smart Vision Development Board, 320 × 480 Resolution, Equipped With OV5647 5MP Camera, Built-in Microphone And Speaker, Supports Wi-Fi 6 And BLE 5","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eESP32-P4-WIFI6-Touch-LCD-3.5\u003c\/strong\u003e is a high-performance development board based on ESP32-P4 controller with RISC-V 32-bit dual-core and single-core processors. Equipped with 3.5inch IPS touch display, highly integrated power management chip, and low-power audio codec chip, features rich human-machine interfaces including MIPI-CSI (with integrated Image Signal Processor), it also supports USB OTG 2.0 HS for high-speed connectivity.\u003cbr\u003eThe ESP32-P4 chip integrates the Digital Signature Peripheral and a dedicated Key Management Unit, ensuring secure data and operations. Specifically designed for high-performance and high-security applications, to meet the higher requirements of embedded applications such as Human-Machine interaction, efficient edge computing, and IO expansion.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-performance MCU with RISC-V 32-bit dual-core and single-core processors\u003c\/li\u003e\n\u003cli\u003eOnboard ESP32-C6H8 module serving as a Wi-Fi 6 co-processor, extending Wi-Fi 6 and BLE 5 capabilities for ESP32-P4\u003c\/li\u003e\n\u003cli\u003e128KB HP ROM, 16KB LP ROM, 768KB HP L2MEM, 32KB LP Static RAM, 8KB TCM\u003c\/li\u003e\n\u003cli\u003ePowerful image and voice processing capability. Provides image and voice processing interfaces including JPEG Codec, Pixel Processing Accelerator, Image Signal Processor, H264 encoder\u003c\/li\u003e\n\u003cli\u003e32MB PSRAM in the chip's package, with onboard 16MB Nor Flash\u003c\/li\u003e\n\u003cli\u003eOnboard Type-C ports, more convenient, better device compatibility\u003c\/li\u003e\n\u003cli\u003eOnboard 3.5inch capacitive touch IPS display for clear color picture display, 320 × 480 resolution, 262K color\u003c\/li\u003e\n\u003cli\u003eBuilt-in ST7796 display driver and FT6336 capacitive touch chip, using SPI and I2C communication respectively, effectively saving the IO resources\u003c\/li\u003e\n\u003cli\u003eOnboard programmable PWM and BOOT buttons for easy custom function development\u003c\/li\u003e\n\u003cli\u003eOnboard 3.7V MX1.25 Lithium Batt recharge\/discharge header\u003c\/li\u003e\n\u003cli\u003eAdapting I2C, UART, USB and multiple GPIOs for external device connection and debugging, enabling flexible peripheral configuration\u003c\/li\u003e\n\u003cli\u003eOnboard TF card slot for extended storage, high-speed data transfer, and enhanced flexibility, suitable for data logging and media playback, simplifying circuit design\u003c\/li\u003e\n\u003cli\u003eOnboard camera interface, supporting OV5647 and other MIPI-CSI cameras\u003c\/li\u003e\n\u003cli\u003eAdopts AXP2101 IC for efficient power management, supports multiple voltage outputs, Batt charging, Batt management, and Batt life optimization, etc.\u003c\/li\u003e\n\u003cli\u003eSecurity features: Secure Boot, Flash Encryption, cryptographic accelerators, and TRNG. Additionally, hardware access protection mechanisms help to enable Access Permission Management and Privilege Separation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOnboard Resource\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54018-content1.jpg?v=1790424107\" alt=\"\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-P4NRW32\u003c\/strong\u003e\u003cbr\u003eESP32-P4 with integrated 32MB PSRAM\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e16MB Nor Flash\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera interface\u003c\/strong\u003e\u003cbr\u003e15PIN 0.5mm pitch interface for connecting MIPI-CSI (2-lane) camera\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAXP2101\u003c\/strong\u003e\u003cbr\u003eHighly integrated power management IC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB TO UART Type-C port\u003c\/strong\u003e\u003cbr\u003efor power supply, programming and debugging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB OTG Type-C port\u003c\/strong\u003e\u003cbr\u003eUSB OTG 2.0 High Speed port\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOnboard microphone\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower \/ Charge indicator\u003c\/strong\u003e\u003cbr\u003eAfter connecting to external power, it lights red when the batt is fully charged or when no batt is connected; lights green while the batt is charging\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eAmplifier IC\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker header\u003c\/strong\u003e\u003cbr\u003eMX1.25 2PIN connector, supports 8Ω 2W speaker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTF card slot\u003c\/strong\u003e\u003cbr\u003eSDIO 3.0 interface protocol\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIPEX 1 connector and onboard ceramic antenna\u003c\/strong\u003e\u003cbr\u003eUses the onboard antenna by default, switching to use external antenna via resoldering an onboard resistor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePWR button\u003c\/strong\u003e\u003cbr\u003eLong press 6s to power off, short press to power on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRESET button\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBOOT button\u003c\/strong\u003e\u003cbr\u003ePress it when powering on or resetting to enter download mode\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMIPI DSI LCD connector reserved pad\u003c\/strong\u003e\u003cbr\u003esupports 0.5mm pitch 15pin connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eES8311 low-power audio codec chip\u003c\/strong\u003e\u003cbr\u003efor audio encoding and decoding\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.54mm GPIO header\u003c\/strong\u003e\u003cbr\u003eadapting available IO function pins for easy expansion\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMX1.25 Lithium Batt header\u003c\/strong\u003e\u003cbr\u003eMX1.25 2PIN connector, for 3.7V Lithium Batt, supports charging and discharging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-C6 module\u003c\/strong\u003e\u003cbr\u003eSDIO interface protocol, extending Wi-Fi 6 \/ Bluetooth 5 (LE)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSPI display interface\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eI2C touch panel interface\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eRelated Document\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/docs.waveshare.com\/ESP32-P4-WIFI6-Touch-LCD-3.5\" target=\"_blank\" rel=\"noopener\"\u003eWiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveShare","offers":[{"title":"Default Title","offer_id":50532543103053,"sku":"E54018-001","price":71.17,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54018-win1.jpg?v=1790424233"},{"product_id":"esp32-c6-2-8inch-ips-capacitive-touch-display-development-board-240-320-resolution-262k-color-integrated-wi-fi-6-bluetooth-5-and-ieee-802-15-4-zigbee-3-0-and-thread","title":"ESP32-C6 2.8inch IPS Capacitive Touch Display Development Board, 240 × 320 Resolution, 262K Color, Integrated Wi-Fi 6, Bluetooth 5, And IEEE 802.15.4 (Zigbee 3.0 and Thread)","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThis product is designed by Waveshare with onboard 2.8inch LCD display, 6-axis sensor, temperature and humidity sensor, and TF card slot, providing the hardware foundation for display, sensing, voice, and multimedia storage. With these hardware resources, it supports fun interactive mini-games and voice wake-up. It allows access to online AI large model platforms, enabling intelligent voice interaction and continuous upgrades. It comes pre-installed functions such as AI conversation, audio playback, a gravity ball game, 2048 game, and weather. It can be used directly as an AI chatting toy, while also supporting customization and secondary development.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEquipped with the ESP32-C6-WROOM-1 series module, featuring a RISC-V 32-bit processor, up to 160MHz main frequency, and built-in 16MB Flash memory\u003c\/li\u003e\n\u003cli\u003eIntegrated Wi-Fi 6, Bluetooth 5, and IEEE 802.15.4 (Zigbee 3.0 and Thread) wireless communications, with outstanding RF performance\u003c\/li\u003e\n\u003cli\u003eOnboard Batt recharge management module, with reserved 3.7V MX1.25 Lithium Batt header for connecting external Batt\u003c\/li\u003e\n\u003cli\u003eType-C port, improving device compatibility, easier to use\u003c\/li\u003e\n\u003cli\u003eOnboard 2.8inch LCD display, 240 × 320 resolution, 262K color\u003c\/li\u003e\n\u003cli\u003eSupports capacitive touch controlled via I2C interface, with interrupt support\u003c\/li\u003e\n\u003cli\u003eAdapting UART, I2C and some IO interfaces, integrates full-speed USB port\u003c\/li\u003e\n\u003cli\u003eOnboard QMI8658 6-axis sensor, RTC sensor, SHTC3 temperature and humidity sensor, TF card slot, etc.\u003c\/li\u003e\n\u003cli\u003eSupports accurate control such as flexible clock and multiple power modes to realize low power consumption in different scenarios\u003c\/li\u003e\n\u003cli\u003eOnboard ES8311 audio codec chip, NS4150B power amplifier chip, microphone, and speaker\u003c\/li\u003e\n\u003cli\u003eSupports ESP-IDF, Arduino, and other development environments, with rich resources for quick and easy development\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOnboard Resource\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54019-content1.jpg?v=1790454037\" alt=\"\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-C6-WROOM-1\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpansion IO pads\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMX1.25 2PIN speaker header\u003c\/strong\u003e\u003cbr\u003eAudio output signal, for connecting external speaker\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eES8311\u003c\/strong\u003e\u003cbr\u003elow-power audio codec chip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNS4150B\u003c\/strong\u003e\u003cbr\u003eaudio power amplifier chip\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSHTC3 temperature and humidity sensor\u003c\/strong\u003e\u003cbr\u003eprovides temperature and humidity measurement for environmental monitoring applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQMI8658\u003c\/strong\u003e\u003cbr\u003e6-axis IMU includes a 3-axis gyroscope and a 3-axis accelerometer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOnboard microphone\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCF85063 RTC chip\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSH1.0 2PIN RTC Batt header\u003c\/strong\u003e\u003cbr\u003efor connecting rechargeable RTC Batt\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMX1.25 2PIN Lithium Batt header\u003c\/strong\u003e\u003cbr\u003efor 3.7V Lithium Batt, supports charging and discharging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUART header\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharging indicator\u003c\/strong\u003e\u003cbr\u003eLithium battery charge indicator, lights up when charging, off when fully charged (the light status is uncertain when the battery is not connected)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Type-C port\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eETA6098 charging management chip\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eI2C header\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSH1.0 12PIN connector\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTF card slot\u003c\/strong\u003e\u003cbr\u003esupports TF card up to 64GB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower ON\/OFF chip\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBAT power button\u003c\/strong\u003e\u003cbr\u003eWhen a Batt is connected, long press 2s to power off, short press 1s to power on\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCH32V003 IO expansion chip\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRESET button\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBOOT button\u003c\/strong\u003e\u003cbr\u003efor entering download mode, and can also be reused as a general-purpose button\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e2.8inch display panel connector\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eRelated Documents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/docs.waveshare.com\/ESP32-C6-Touch-LCD-2.8\" target=\"_blank\" rel=\"noopener\"\u003eWiki\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"WaveShare","offers":[{"title":"Default Title","offer_id":50533376262221,"sku":"E54019-001","price":44.04,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0668\/0641\/5437\/files\/E54019-win1.jpg?v=1790454123"}],"url":"https:\/\/www.mlab.com.au\/collections\/displayesp32.oembed","provider":"MLAB","version":"1.0","type":"link"}