RP2350-USB-A is a mini RP2350 development board with a USB expansion port that is compatible with USB 2.0/1.1 transmission. Under the extremely small board size, 15 multifunctional GPIO pins are led out, and the PCB edge adopts half hole technology, which can be easily and quickly integrated into the project.
Features
RP2350 microcontroller chip officially designed by Raspberry Pi
Adopts unique dual-core and dual-architecture design, equipped with dual-core ARM Cortex-M33 processor and dual-core Hazard3 RISC-V core processor, flexible clock running up to 150 MHz
Built-in 520KB of SRAM and 2MB of on-chip Flash
Onboard 1 USB port, compatible with USB2.0/1.1 transmission
Castellated module allows soldering directly to carrier boards
Drag-and-drop programming using mass storage over USB
Disclaimer: MLAB is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Arduino AG, Raspberry Pi Trading Ltd., Espressif Systems (Shanghai) Co., Ltd., or any of their subsidiaries or affiliates. All product names, trademarks, and registered trademarks are the property of their respective owners. Our boards and products are designed to be compatible with these platforms and are intended for educational, prototyping, and development purposes. The use of these trademarks is for descriptive and referential purposes only and does not imply any endorsement or sponsorship.
Choosing a selection results in a full page refresh.
